3 Ways To Manage a Mold Problem
Mold spores are everywhere, but you can take measures to keep them from multiplying in your home. Address water damage from any source such as a leak or flood before mold growth starts by following these three mold prevention tips.
1. Eliminate Moisture: Mold cannot thrive without moisture present. Call a plumber if necessary to quickly repair any leaks. You should then thoroughly dry the affected area to limit the amount of primary and secondary damage. Take steps to prevent moisture from collecting or lingering in rooms in your home where water is frequently used, such as the kitchen or bathrooms. You may want to run a dehumidifier to dry out porous or semi-porous building materials and contents.
2. Survey the Damage: After water damage occurs, you should survey the extent and come up with a strategy to quickly remove all water and dry wet materials and contents. Keep in mind that items exposed to Category Two grey water or Category Three black water, which may contain contaminants or sewage, will also need to be cleaned. You may want to rely on the expertise of damage restoration professionals to perform this cleanup and prevent mold from starting to grow.
3. Replace or Restore: Determine which damaged materials or items need to be thrown away and replaced and which items should be restored. Perform a cost-benefit analysis to determine the most practical approach. There are a variety of methods for restoring delicate items such as paintings, leather, or upholstery. You may need to tear out and replace carpeting or drywall.
These mold prevention methods can prevent water damage from escalating into mold damage. Keep in mind that mold growth may begin in as little as 24 hours after a leak or flood. Follow these tips and do not hesitate to rely on the expertise of mold remediation specialists in Phillipsburg, NJ. For more information, visit http://www.SERVPROwarrencountynj.com/.